News
1/13/2010 - Conax Technologies to Exhibit at 501 F&G Vendor Fair
Conax Technologies will be exhibiting at the 501 F&G Vendor Fair February 22nd, 2010. Please stop by our Booth #43 to see our product lines. Call
8/13/2009 - High Pressure Thermocouples, RTDs, Compression Seal Fittings
Conax Technologies recently developed a new brochure highlighting our high pressure temperature sensor and compression seal fitting assemblies. The products presented in this brochure are designed for extreme temperature or pressure environments. Download the brochure here.
Conax Technologies temperature sensor assemblies have proven their durability and reliability in a variety of high pressure and high temperature environments. Conax Technologies also manufactures high pressure seals for electrodes, instrument signal wires and temperature sensor leads.
7/16/2009 - Multiple Hole Sealed Feedthrough Video
See our videos on YouTube! This video below highlights our MHM series which is a multiple hole sealed feedthrough. MHM glands can be used to seal gradient thermocouple, RTD, or thermistor probes; tube bundles or a variety of devices in a single fitting. The replaceable sealant permits repeated use of the same fitting and allows elements to be easily assembled or replaced in the field.
7/14/2009 - Autoclave Temperature Probes
Conax Technologies recently updated the autoclave temperature probe brochure which has detailed information on our Sterisensor product line. The Conax Sterisensor withstands the environmental conditions found in pharmaceutical autoclave chambers. Sterisensor’s engineered moisture seal prevents the ingress of moisture which is the leading cause of failure. Download the brochure here or request that it be mailed to you.
6/30/2009 - Sample Probe Specification Form
To better serve our customers, Conax developed a Sample Probe Specification Form which is used to configure an assembly best suited for your application. The 3D drawing and associated form fields present all available options and performance requirements of a sample probe assembly.
Conax Technologies retractable Sample Probe Assemblies are used to hot tap or inject into basically any type of liquid or gas stream. Typical applications of a sample probe are oil and gas sampling, oxygen sampling, grain sampling, potable water sampling, waste water sampling, water quality sampling, and water or chemical injection.
Download the form here or visit the Sample Probe product page for detailed information.
6/25/2009 - MI (mineral insulated) Cable - New Brochure!
We have produced a new brochure to provide detailed information on our mineral insulated (M.I.) cable offerings. The new M.I. cable brochure includes all available options for sheath materials & diameters, calibration types, insulation and special applications capabilities. Download the M.I. cable brochure here.
Conax Technologies is ISO 9001 certified in the design and manufacture of mineral insulated metal sheathed cable. Known as Con-O-Clad, Conax MI cable is produced to exacting standards using only the highest quality materials to ensure reliable and robust performance. Each completed lot of material undergoes strict quality assurance tests (electrical & dimensional) and is calibrated in our NIST Traceable Calibration Lab to ensure all requirements are met.
6/22/2009 - Conax Furnace and Autoclave
The Furnace and Autoclave division of Conax Technologies has introduced a new website to present all available control sensors, power feedthroughs, instrumentation feedthroughs and other temperature measurement and pressure/vacuum sealing devices available for the Furnace and Autoclave Industry. The site has customized specifications and performance ratings relative to various equipment types such as furnaces, autoclaves, ovens, kilns, freeze dryers, etc. Visit the site now for more information.
3/30/2009 - High Performance Electrical Power Feedthrough
High Performance Electrical Power Gland
With Single PEEK™ Insulator (up to 8,000 volts)
Conax Technologies now offers a new electrical power sealed feedthrough that can electrically and/or thermally isolate single electrodes, tubes or temperature sensors for use in vacuum furnaces, liquid level probes, transformers, environmental chambers, power leads and more. For complete information please visit the HEGPK product page or download the product brochure.
3/30/2009 - New Product Literature!
New Sample Probe Brochure
Download the new four page brochure highlighting the feature and benefits, installation instructions and ordering information for the Conax Sample Probe Assembly. As always, feel free to contact us for more information.
2/2/2009 - New Product Offering
Conax Technologies now offers Type N (Nicrosil/Nisil) Thermocouple wires for its HD and TG24T compression seal fittings. Please see the HD and TG24T product pages for more information or contact your sales engineer at 1-800-223-2389.
High Density (HD) feedthrough series seals from 12 to 60 wires per unit, 24 AWG and Teflon insulated.
Transducer Gland Teflon (TG24T) utilizes 24 AWG Teflon insulated copper or thermocouple leads rated at 100VDC. Seals up to 24 Teflon insulated, 24 AWG instrument leads per fitting to 8000 psi (551 bar).
12/16/2008 - Miniature Bearing Sensors
Miniature Bearing Sensors 
Conax Technologies has developed new product literature featuring its Miniature Bearing Sensor product. The four page document highlights Case Style A, B, C, D, E embedment RTDs with specifications, installation instructions and ordering information. Download the literature here or call 1.800.223.2389 to request it to be mailed to you.
11/20/2008 - New Interactive Animation!
View our Interactive Animation - What is a Compression Seal Fitting?
Our new product animation demonstrates the assembly and application of a very simple compression seal fitting. Its interactive and easy to navigate to different sections. Turn up your sound and watch it now - Animation
- Watch a simple fitting assembled into a pressure vessel
- See close-up animations of a soft sealant being compressed
- Watch pressure build within a vessel and our fitting withstand up to 30,000 psig.
11/19/2008 - View our new Video
View our new Split Seal Fitting Video
This video highlights the features and benefits of the Conax Split Seal Fittings.
Split glands are designed to facilitate assembly and sealant replacement without removing the elements from the system. This video demonstrates the application, assembly, and different variations of the Split Seal Fitting. For more specific information view the SPG/DSPG product page.
READ MORE in News Archives