Providing Power into an Autoclave or Furnace
Conax Furnace & Autoclave > Providing Power into an Autoclave or Furnace
If you need to provide power to a fan, motor, heater or other AC or DC powered device, Conax has two great solutions covering virtually any power feedthrough requirement.
Our power series compression seal fittings are simple and reliable mechanical pressure and vacuum seal fittings to supply high voltage or current to your equipment and protect your environment.
Single Electrode Style
Single Electrode Style
Our single electrode style compression seal fittings allow for up to 525 amps per single electrode at up to 8000 VDC.- Electrode diameters: from .093” to 1.00” (23.6 to 25.4 mm)
- Rated up to 8,000 Volts DC
- Rated up to 525 amps
- Seal capability up to 8,000 PSI (551 Bar)
- Temperature Range: -300ºF to 1600ºF(-184º to 871ºC)
- High Voltage Power Feedthrough (EGT)
- High Voltage/Pressure Power Feedthrough (HEGPK)
- High Temperature Power Feedthrough (EG)
Power Lead Style
Power Lead Style
Our Power Lead compression seal fitting provides multiple sealed, insulated wires for inserting power into an autoclave or furnace.
- Multiple 20 AWG to 8 AWG lead wire available in a single fitting
- 600 volt rated
- Up to 55 amps per wire.
- Seal capability up to 10,000 PSI (689 Bar)
- Temperature Range: –300ºF to 450ºF(-184º to 232ºC)
Hybrid Electrode Style - field re-buildable ‘plug and play’ solution.
Don’t see what you need?
Contact our Application Engineers to explain your process and we will provide a solution.
Also be sure to read the Case Study that describes our custom heater power feedthrough for an aerospace parts autoclave. It portrays our wide range of capabilities.
>> Read Case Studies
Contact Us
Our Furnace and Autoclave Application Engineers are always available to assist you with your application.
Download Literature
Request Your
Catalog: #5001C
What is a Compression Seal Fitting?